There's nothing wrong in the log, but it's not the whole log, it's basically just start up. Can you share the portion between that and the first time someone logged in?

https://pastebin.com/rmNhAWvM

that's a new log. i don't remember being awake at 5am, but oh well. the end is with me logged in.

There's nothing wrong in the log, I'd expect it to work. If you set DiagnosticLogs = true in ArgusMagnus.ServersideQoL.cfg the next time you try, it would print out the actual config values it's using amongst other things. Maybe that would help us see what's going on.

Okay, I'll get to it in the evening. I'm considering dropping the docker container and host through a vm at this point, it's quite frustrating.

I'll try this first though and send you the log.

What would be the easiest way to try it the mod works? I only need it on the server, right?

I've never used a valheim container for hosting myself, so I can't help on that front.

What would be the easiest way to try it the mod works?

What you did initially (testing AutoStore or placing a chest and check if the signs appear) are good tests

I only need it on the server, right?

Yes, that's the whole point of this mod 😉

https://pastebin.com/RAr0pvwE

Was able to remote into my server and do the true change and restart, but can't join the server yet 😅

Atleast I think I did start it after the change, now I question myself 😅 and this should be the right log, but it's unfamiliar on the phone.

The log is cut off a little bit too early. SQoL delays a lot of initialization until the world is loaded, that's why the interesting stuff in the logs usually only shows up later in the log

Ah ok, will get to it at home then

https://pastebin.com/4Z9Lwvxi Wife logged in 40min ago, I don't know if anything changed in the log.

From what I see, AutoStore should work. The ContainerSigns you first need to configure, currently none are enabled

how would it work? i just throw stone on a chest that has stone and it should grab it? i'll look into container, what about tame? that's the one i care most for.

Have you read the config files? Most things are documented in there

Default text for chest signs

Setting type: String

Default value: •

ChestSignsDefaultText = Treasure Inside

hope this works

Options to automatically put signs on wood chests

Setting type: SignOptions

Default value: None

Acceptable values: Left, Right, Front, Back, TopLongitudinal, TopLateral

Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)

WoodChestSigns = None

Options to automatically put signs on reinforced chests

Setting type: SignOptions

Default value: None

Acceptable values: Left, Right, Front, Back, TopLongitudinal, TopLateral

Multiple values can be set at the same time by separating them with , (e.g. Debug, Warning)

ReinforcedChestSigns = None

aaaahhhh i see.

signs work! all of them display treasure inside, will figure out what to do with them later.

autostore works now aswell!

no idea how to test tame yet, just started playing again

thanks a lot for all of your help and what you're doing for all the serverhosters out there :D

Thanks 😊